Rust Preventives

Rust Preventives - Solvent-Based Products

Sheath® RB1

Sheath® RB1 Rust Preventive Oil

Solvent-based, 126°F flash point

An effective water-displacer that forms a slightly oily protective film with excellent rust protection and lubricity. Its thin-bodied consistency allows the liquid to quickly penetrate blind holes and recessed areas to remove water and form a protective barrier film. The light oil protective film enhances lubricity to aid in assembly and is compatible with all lubricants & greases. Not for sale in California. Please see Sheath Low-VOC. [Buy Online]


Sheath® Low-VOC Rust Preventive Oil

Solvent-based, 248°F flash point

A Low-VOC version of Sheath Oil above that contains No Volatile Organic Compounds. For use in applications that require the protection of a solvent-based oil, but are also sensitive to VOC or flash point issues. The protection levels are the same as that of the regular Sheath RB1 above, but the Low-VOC feature creates another option for use in these restricted areas. [Buy Online]


Dri-Touch® IRP1

Dri-Touch® IRP1 Dry-to-touch Rust Preventive

Solvent based, 126°F flash point

A super-fast water-displacer and penetrant that forms a dry-to-touch film with good handling properties. Ideal for use on bare steel components, such as raw steel/casting inventory, tooling/fixturing or fine quality gages, calipers, etc. Its non-dimensional film has self-healing properties to offer stout protection for critical surfaces. Not for sale in California. Please see Dri-Touch Low-VOC. [Buy Online]


Dri-Touch® Low-VOC Rust Preventive

Solvent based, 250°F flash point

A Low-VOC version of Dri-Touch above that contains No Volatile Organic Compounds. For use in applications that require the protection of a solvent-based product, but are also sensitive to flash point/combustibility issues. The protection levels are the same as that of the regular Dri-Touch above, but the Low-VOC feature creates another option for use in these restricted applications. [Buy Online]


Dri-Touch® Amber IRP2

Dri-Touch® Amber IRP2 Rust Preventive

Solvent based, 130°F flash point

A highly effective rust blocker that forms a colorless, odorless barrier film with a dry-to-touch consistency that will not drain off the parts or wick off onto packaging materials, like oily products can. Its excellent handling properties make this product the ideal choice for use as a sealant over black oxide or phosphate finishes. Offers robust protection for products shipped to dealer warehouses or blister packed for retail sale. Not for sale in California. Please see Dri-Touch Amber Low-VOC. [Buy Online]


Dri-Touch® Amber Low-VOC Rust Preventive

Solvent based, 250°F flash point

A Low-VOC version of the Dri-Touch Amber above that contains No Volatile Organic Compounds. For use in applications that require the robust protection of a solvent-based coating, but have flash point or combustibility issues - for example, parts being coated in the heat treat department or in an area with gas-fired space heaters. Or, in plants that are under regulatory air quality restrictions. The ultimate protection levels are the same as that of the regular Dri-Touch Amber, but its Low-VOC property creates viable options for these restricted applications. [Buy Online]


Dri-Touch Amber LOW-VOC

Dri-Touch® Plus IRP3 Heavy-Duty Rust Preventive

Solvent based, 130°F flash point

A heavy-duty protective coating that leaves a somewhat thicker film than the Dri-Touch Amber above. Suitable for use on parts going into storage or into dealer warehouses, this product is also an effective water displacer, with a self-healing, soft-waxy film, with a noticeably thicker consistency, with better moisture resistance. Not for sale in California. Please see Dri-Touch Amber Low-VOC. [Buy Online]


Sheath® WS12

Dri-Touch® DS Dewatering Sealant

Solvent based, 130°F flash point

This product is an excellent water displacer that forms an invisible protective film on fine quality surfaces or non-porous surfaces. Ideal for use as a sealant for the Lumiclad® black oxide on aluminum because it is non-porous, but it also works very well to seal zinc or nickel plated surfaces to enhance the corrosion resistance in low-current density areas, or on parts that require a sealant that is not noticeable itself, such as fine-quality gages, calipers, micrometers, etc. Not for sale in California. Please see Dri-Touch Low-VOC. [Buy Online]